EXTERIOR & SPECIALIST SURFACE PRINTING

Direct UV Printing for
Exterior & Specialist Surfaces

Selected exterior and specialist surfaces can be considered for high-definition direct UV printing, creating integrated graphics without installing vinyl, stickers, wraps or separately printed panels.

From architectural features and commercial surfaces to selected exterior applications, every project is assessed around the material, condition, exposure, access and intended use before printing is confirmed.

REGISTER INTEREST
SEE APPLICATIONS

Subject to site survey, surface suitability, exposure, access and technical confirmation.

Direct UV Surface Printing

The artwork is applied directly onto the suitable material itself.

Broad Material Range

A wide range of stable surfaces can be assessed for direct printing.

Project-Specific Review

Surface type, condition, access and intended use are reviewed before production.

Specialist Applications

Suitable for selected commercial, architectural and refurbishment applications.

after 2
glass model
before after 1
mk01 surfaceprint solutions (20)
menu 2
menu 3.2
after1
menu 1
after
mk02 surfaceprint solutions (31)
mk02 surfaceprint solutions (30)
mk02 surfaceprint solutions (29)
mk02 surfaceprint solutions (27)
mk02 surfaceprint solutions (25)
mk02 surfaceprint solutions (23)
mk02 surfaceprint solutions (22)
mk02 surfaceprint solutions (20)
mk02 surfaceprint solutions (14)
mk02 surfaceprint solutions (21)
mk02 surfaceprint solutions (10)
mk02 surfaceprint solutions (11)
mk02 surfaceprint solutions (9)
mk01 surfaceprint solutions (27)
mk02 surfaceprint solutions (26)
mk01 surfaceprint solutions (22)
mk01 surfaceprint solutions (23)
mk01 surfaceprint solutions (14)
mk01 surfaceprint solutions (6)
chatgpt image may 6, 2026, 04 51 00 pm
generated image december 24, 2025 6 48pm
3d printing
2025年11月7日02

DIRECT PRINT, NOT APPLIED COVERINGS

Take Direct Surface Printing Beyond the Interior

Direct-to-surface UV printing can open up creative opportunities across a wide range of suitable non-standard materials, including brick, concrete, wood, glass, ceramic, metal, acrylic and selected panels.

Rather than covering these materials with vinyl, wallpaper or a separate printed layer, the design is applied directly onto the surface itself — allowing its natural texture, grain and character to remain part of the finished visual.

Where a material, coating or finish has not previously been confirmed, further assessment or a sample test may be recommended before production.

    ◈ Surface Character Retained
    ◈ Material Suitability Reviewed
    ◈ Environment Considered

Print Across a Broad Range of Suitable Materials

The technology can potentially work across many stable solid surfaces, allowing commercial projects to go beyond conventional wall graphics.

REGISTER PROJECT INTEREST
WANT TO BUY A PRINTER

Walls

Wood

Brick

Ceramic

Concrete

Glass

Panels

Floors

Before

After

Direct UV Printing for Exterior & Specialist Surfaces

Most commercial graphics are produced on another material before being installed as wallpaper, vinyl, stickers or panels.

Direct-to-surface UV printing works differently. The print is applied directly onto the prepared surface itself, helping the finished result feel integrated with the material rather than placed over it.

This is why surface assessment matters. The material, texture, access, preparation and intended use all influence what can be achieved.

after
COMMERCIAL, ARCHITECTURAL AND REFURBISHMENT APPLICATIONS.

Specialist Surfaces That Can Be Assessed

Suitable surfaces vary by project. SurfacePrint Solutions can review a range of commercial and specialist materials to understand whether direct-to-surface UV printing is technically appropriate.

Exterior Panels

For commercial panels, façade features and entrance areas where access can be assessed.

Brick

For textured brick surfaces where preparation, condition and surface stability are suitable.

Concrete

For prepared concrete or concrete-effect surfaces in selected commercial environments.

Glass

For suitable glass panels, partitions and specialist internal or sheltered features.

Wood

For selected timber and wood-effect surfaces where texture and grain remain part of the finish.

Ceramic

For suitable ceramic, tiled or specialist hard surfaces, subject to adhesion and preparation checks.

Metal & Composite Panels

For selected prepared panels where surface coating, finish and exposure are reviewed.

Floors & Threshold Areas

For selected floor or entrance-adjacent graphics, subject to wear, cleaning and surface suitability.

Suitable surfaces vary by project. Site survey and technical confirmation are required.

mk02 surfaceprint solutions (27)
READY TO TRANSFORM YOUR SPACE?

Let’s create something exceptional together.

Get in touch today for expert advice and a
no-obligation quote.

REGISTER YOUR INTEREST
LEARN MORE

GET IN TOUCH

0333 339 4464

Project enquiries &
technical questions ?

CLICK HERE

PRINTER SALES & INFORMATION

Interested in Friankor direct surface printing technology, UK sales, training or product information?

FRIANKOR UK SALES →
REGISTER INTEREST →

WHERE WE WORK

South England
South West England
Southern Wales

Scroll to Top